WSWeldScopeInteractive welding engineering training
Design and structural engineering

Statically loaded welds

Static weld verification must connect the analytical model with the geometry, process and inspection actually delivered. The welding coordinator does not replace the structural designer, but must verify that the design assumptions are manufacturable and demonstrable.

Open interactive module →

Topic overview

Static weld verification must connect the analytical model with the geometry, process and inspection actually delivered. The welding coordinator does not replace the structural designer, but must verify that the design assumptions are manufacturable and demonstrable.

Does the analytical model reflect the real force path, effective section and quality that production can repeatedly achieve?

Separate axial force, shear, bending and torsion, including eccentricity.

Check connected plates, notches, local flexibility and through-thickness direction.

What the module covers

  • 1. Weld design model
  • 2. Force flow and basic relationships
  • 3. Typical configurations
  • 4. Complete penetration, partial penetration and fillet welds
  • Release checklist
  • Practical rule
Educational content does not replace current standards, approved WPS/WPQR documentation or decisions by competent welding coordination personnel.

Related topics

Continue with the practical module.
Open this topic directly in the interactive WeldScope portal.

Start module →